Step 2 Cutting out the galley
After step 1 you should be left with little but the ‘mirrored’ galley shape. Cutting this out will be tricky because of the spikes, beard and tail, but take your time and trim off excess card every so often, particularly if it is getting in the way. Don’t attempt to cut in around the teeth as this will be much too fiddly and could cause irreversible damage to the head. In order to save time and for a neat job the ‘mirrored’ galley image can be folded in half. Be sure to fold right at the line running between the two galley halves otherwise the model may not match on both sides.